If you are interested in understanding the business of manufacturing gas lighters, you can get the detailed project report from the website.
We provide information on the gas lighter manufacturing business, utilised in every household, under the new business idea. Every community now has a gas stove, thanks to the government’s Ujjwala initiative. Gas lighter demand has risen as a result, not only in cities but also in rural regions. The need for this equipment will continue to grow as long as LPG gas is available. Most people use it because it is safer to light a gas stove using a gas lighter. It’s a lot less expensive than matches. It lasts for several years after purchase.
A gas lighter is a small portable gadget used to light a gas burner and keep it running. It’s a bit of an easy-to-use device that’s a must-have for any kitchen with a manual ignition system. A piezoelectric crystal is used in the electronic gas lighter. When mechanically distorted, this crystal can create voltage. It establishes high voltage across a spark gap, which ignites a gas when it comes into contact. A spring-loaded hammer strikes quartz to produce a spark when the button on a piezoelectric ignitor is pressed. This is the standard method for lighters of this type. This generates the requisite voltage for a spark to occur. Simultaneously, this process generates enough energy to ignite a spark.
You need to understand the potential opportunities in the market for gas lighters before preparing the business plan report for the project.
The release of household gas connections by various gas suppliers around the country directly impacts the demand for any form of gas lighter. The usage of home gas connections by multiple households around the country is closely tied to the need for any gas lighter. On the other hand, users choose different forms of gas lighting equipment, such as matching electrical or electronic gas lighters.
The usage of electronic gas lighters is quite popular due to the several benefits listed above. Even established gas users have been migrating to electronic gas lighters in growing numbers. Currently, roughly 50 small-scale plants are producing electronic gas lighters, with an annual capacity of 30,000 to 50,000 units; because a gas lighter is affordable to most consumers, demand increases by the day.
On the other hand, users choose different forms of gaslighting equipment, such as matching electrical or electronic gas lighters. Electronic gas lighters are pretty popular because of the inherent advantages mentioned above. Even established gas users have been migrating to electronic gas lighters in growing numbers. In Uttar Pradesh, there is currently no small-scale plant manufacturing electronic gas lighters.
A project report of a gas lighter manufacturing plant is necessary for the following reasons.
A piezoelectric crystal is positioned above a spring-loaded hammer in the gas lighter, generally cylindrical form. A button holds the hammer and spring assembly. The hammer is pushed away from the piezoelectric crystal when this button is pressed. The spring releases the hammer when the button is depressed beyond a certain point. The hammer strikes the piezoelectric crystal.
A high voltage of 800 volts is created due to the piezoelectric action. The lighter is designed to apply the entire voltage in a small air gap between two metallic points. The air is ionised and acts as a route for the discharge due to the high voltage created. This electric discharge is the spark that ignites the combustible gas from the stove and produces flame when it is exposed to it. Due to their low cost and great sensitivity, piezoelectric ceramics such as lead zirconated Titanate, often known as PZT, are utilised in gas lighters.
Also, Read the Article on the Brass Utensil Manufacturing Project Business Plan.
S.S. Nuts, Piezoelectric ceramic, cartridge/slug, Copper Contacts, S.S. Screw, MS Screws, Aluminum Screws, MS Rivets, SS Rivets, Aluminum Rivets, Screws & Nuts, Aluminum Nuts, MS Nuts, M.S. Tubing, Spring, Plastic powder/granules, M.S. Strip, Hardware, Packing materials.
Outside job work for sheet metal and M.S. tubing/cases are possible. Injection moulding machines are used to create moulded components. The installation of piezoelectric ceramic cartridges, sheet metal components/parts, and moulded parts in M.S. tubing/cases is finished. Before being packed and sent, the entire completed product is checked for life cycle ignition.
Also Read: Copper Powder Manufacturing Project and Business Plan
Although there is no BIS standard for this product, can use the following parameters to determine its quality:
The gas lighter is expected to be able to execute the following functions:
1. To create a voltage greater than 10 kV.
2. The gas lighters must function more than 30,000 times, with a spark production time of no less than ten milliseconds.
The project report of the gas lighter includes the following points.
| Sr. No. | Particulars |
| 1 | Genesis |
| 2 | Project At A Glance |
| 3 | Introduction |
| 4 | Market Potential |
| 5 | Basis & Presumptions |
| 6 | Implementation Schedule |
| 7 | Technical Aspects |
| 8 | Process of Manufacture |
| 9 | Cash Flow Statement |
| 10 | Projected Balance Sheet |
| 11 | Projected Profitability Statement |
| 12 | Computation of Manufacturing |
| 13 | Computation of Working Capital Requirement |
| 14 | Depreciation |
| 15 | Repayment Schedule of Bank Loan |
| 16 | Calculation of D.S.C.R. |
| 17 | Computation of Electricity |
| 18 | Break-Even Point Analysis |
The government of India has been putting a more significant emphasis on energy efficiency in the industrial sector since the 1980s in response to increased energy requirements scarcity, and rising energy costs. On August 18, 2001, the Energy Conservation Legislation of 2001 was enacted, which allows for the effective use of energy, its conservation, and the capacity building of the Bureau of Energy Efficiency established under the act.
The government places a high priority on environmental pollution control. Small-scale business owners should develop an environmentally friendly mindset and implement pollution control strategies such as process modification and technology substitution.
With India’s signing of the Montreal Protocol in September 1992, ozone-depleting substances (ODS) such as chlorofluorocarbons (CFCs), carbon tetrachloride, halons, and methyl chloroform, among others, must be phased out promptly and replaced with alternative chemicals/solvents. From July 19, 2000, a notification for comprehensive guidelines to govern ODS phase-down was issued under the Environment Protection Act of 1986.
Wherever possible, the following procedures are proposed to help limit pollution in the electronics sector:
To run a business creating gas lighters, you’ll need various permits. Every state has its own set of guidelines for this. Visit your local District Industries Center for more information about this.
1) Tulman Gas Lighter 2) NISUN Easy Grip Gas Lighter 3) LITEX Gas Lighter 4) NINTH Gas Lighter 5) DEBRE Steel Lighter 6) Crystal Stainless Steel Lighter 7) SevanAmABS Gas Lighter 8) Crystal Gas Lighter 9) Sevan Amaze 10) Kesariyaji Gas Lighter
The Asia Pacific is expected to continue to be the largest market shareholder during the forecast period of 2020-2027. The increased use of LPG gas connections for cooking in this region has a beneficial influence on market growth. According to figures released by the Ministry of Petroleum and Gas in April 2020, there are around 265.4 million LPG clients in India, with 23,737 distributors serving them. Furthermore, the popularity of fireworks burning during various regional holidays such as Chinese New Year, Diwali, Yamagata prefecture – Akagawa Japan, and others is driving up demand for the product.
The market is estimated to increase at a CAGR of 3.3 per cent over the forecast period of 2022-2027.
The market is expected to grow to USD 6606 million by 2026.
The industry’s primary drivers, such as rising disposable incomes, fast urbanisation, expanding population, rising living standards, an increase in the number of tobacco producers, and increased penetration of big companies into emerging markets, are projected to boost market expansion.
Rapid technical improvements in the sector and a growing move toward refillable lighters due to raising environmental awareness are projected to drive market expansion.
The industry’s key distribution channels include supermarkets and hypermarkets, convenience stores, internet retailers, and cigarette shops.
1) Can sell the final gas lighter in both the wholesale and retail markets. You can set up a stand at the market to sell merchandise. It is possible to sell it by setting up a roadside stand. You may sell it at a fair or expo if you set up a booth. 2) The wholesale market is an excellent place to go if you want to sell in volume. Can sell small and large shops in locations such as a general store, an electric store, a Kirana store, a mall, or a milk dairy. 3) Keeping salesmen or salesgirls on hand allows you to sell door-to-door.
Which are the best lighter for gas stoves available in India?
How can we say the market is demanding this product?
What is the market’s growth rate?
What is the market’s projection for the years 2022-2027?
What are the primary market forces?
What are the global cigarette lighter market’s significant industry trends?
What are the industry’s primary distribution channels?
Where to sell gas lighter in India?
