PVC Tape Project Report



You can immediately download the PVC Tape project report from our website in a gist of time and get access to all the significant data that you are looking for. This information is very useful to you as you can get detail about this startup and considering it, you can write your own project report to attract investors to invest in your business and also get financial assistance from the financial institutions or banks. 


If you are planning to start your entrepreneurial journey by initiating a small-scale business, then you have made the right choice by choosing the PVC Tape manufacturing unit set up from many profitable business ideas in India. You can easily start this business with low capital investment. You need to know a lot about this business as it is just the beginning, and you might have many doubts and queries about this startup.

Starting a PVC insulation tape manufacturing process is the best plastic business in India because demand for PVC insulation tape is such that every household has the requirement. It is used everywhere, like for building construction, motor vehicle office, electronics, and industries such as telecommunications, teleoperators, etc. and double-sided adhesive normal PVC tape usage increasing day by day. 


However, the PVC insulation tapes are in demand these days and used as electrical insulation material. PVC tape significant features are that they are waterproof, oil-proof, shockproof, and temperature proof and all these features present in this tape.


PVC Tape Project Report

One can explore all the important details about this start-up that we have written in our project report. Our experts have made your work easy by writing a PVC Tape project report that you will require to avail bank loan for this business and also you will be able to use it as a map for your new journey. 

Pressure sensitive PVC Insulation tape is famous as electrical insulation material. A major characteristic of this tape is that it is oil resistant, temperature and water resistant too. The pressure sensitive adhesives are made from rubbery type elastomer that is combined with solid resin tackifier or a liquid component. A mixture of resins is used at times to get the desired properties. 

These rheological characteristics of the adhesives can also be modified by adding fillers. Antioxidants may be used to stabilize the adhesives against light and oxidation or heat degradation.

PVC Tape project report is designed for an individual enthusiastic about investing in this business and willing to generate extra earnings with his investment in this business. The complete set up requires a detailed project report and business plan that can tell the entrepreneur in detail about the market research and a lot more. It will help you in assisting to write down the project report and applying for a bank loan.

Market Potential of Insulation Tape in India

PVC tapes contribute around two-third of complete sales at the expense of competitive carton sealing like glues and mechanical fasteners. Increasing sales of corrugated boxes also increase adhesive tape demand in the market. However, in current timing, double-sided tapes are in need, which use fastening and bonding applications in industries like building construction, motor vehicle assembly, etc.

You can earn more profit by doing business of manufacturing Electric Insulation Tapes as well as Cello Tapes and gummed paper Tapes. You can get complete information about the manufacturing of cello tape and gummed paper tape on our website.

Is Adhesive Tape Manufacturing Business Profitable in India?

As manufacturing adhesive tape is a small scale business to start in India that requires very few machines that you can easily get from the market. The price of machines is also affordable. The cost of raw material is quite cheap that you can buy in bulk after bargaining from the suppliers. You can get it from the local sellers also. Since little labour is involved in manufacturing adhesive tapes, so you can start part time or full time manufacturing of PVC tapes in India. The profit margin that you can earn in this business is high as compared to other business types, thus it is a highly profitable business that one can start on a small scale. 

How do I start PVC Tape Manufacturing Business in India?

PVC Tape Business Plan for Bank Loan contains all significant information that relates to business and services in India. There are so many small scale business in India that one can start and get assistance from government subsidies and schemes available to help entrepreneurs. PVC Tape manufacturing is also a business that can get you government scheme and subsidy and you can easily start this business. You can start this business with just Rs 2 lakh if you plan well. 

As far financials are concerned, you can get loan from the bank, and you can get 30 to 40% as subsidy from the government. The basic raw materials that you would require to manufacture PVC Tapes are large jumbo rolls, that come in different sizes and colors. You can get them cut using a machine and get them of desired size. This machine would cost you around Rs 1 lakh. 

PVC Insulation Tape manufacturing Business Registration & License

In starting a small and medium scale PVC insulation tape manufacturing, you have to apply for registration and license from various government authorities. 

Permission and Licenses required for PVC Tape Manufacturing business

If you are interested in starting the business of manufacturing PVC Tapes, then these are the various registrations and licenses that are required to be availed before starting this business.

Registration of firm: You have to register your firm either as a Proprietorship or Partnership firm, even if it is a small to medium scale PVC Tape manufacturing business. 

GST registration: Additionally, you need to be registered for a GST number.

Trade license: You also need to register for a business license with your local authorities.

Pollution certificate: Since manufacturing of PVC Tape deals with various chemicals that can cause pollution to the environment, it is better to take a pollution control certificate from the pollution control board for safety purposes. Pollution control is a big issue. Obtain both ‘Consent to Establish’ and ‘Consent to Operate’ from the State Pollution Control Board.

MSME Udyam Registration: MSME Udyam online registration must be obtained and is mandatory for starting every business. This will enable you to take advantage of all government schemes related to your business.

Trademark: You need to protect your brand, then you have to apply for trademark registration from the municipal authority in your area where you have decided to start a business.

Power Load: PVC tape plants require a high voltage of electricity. Apply for a connection to a local power station.

EPF: crusher plant is a laborious task. Follow EPF (Employees Provident Fund Organisation) and ESIC  norms as per rules.

Factory License: Factory license for large scale industry operations.

BIS: Along with all these Bureau of Indian Standards (BIS) registrations is to be done.

How much does it cost to start a PVC Tape Manufacturing Business in India?

You can apply for an MSME loan for this business, but you have to arrange assurance security as per the bank’s requirement in this condition. 

Such types of projects have high installation and low maintenance costs. One has to invest at least 30% of the total project cost. Or else, for fixed capital investment, therefore you can apply term loan, and for working capital assistance, you can use cash loans or overdraft facilities.

Initially you can start this business with Rs 2 lakh also. The cost of investment depends on the scale of your business. You can buy the required machinery on EMI also. You need to arrange some funds on your own rest you can take assistance from government subsidy schemes. As in, It costs around Rs 3.5 to cut one tape. The same tape in the market costs Rs 10. If you sell it in the market at Rs 7 then you get a good profit and so is the shopkeeper. Henceforth if you cut 200 tapes daily then your cost is around Rs 700 and you can make almost same profit also. 

Raw Material Needed to Manufacture PVC Insulation Tape 

The following materials are required for a one-meter working width adhesive coating plant for PVC tapes: 

  • Unwinder for primary the web with tension control.
  • Rotogravure printing unit.
  • Drying tunnel- 60ft.length.
  • Chilling roll/ Surface support roll.
  • Pneumatic/ Hydraulic web aligner.
  • Dancing roller, Accumulator, Rewinder.
  • C. & D.C. motors, Control Cabinets, Air Blowers with temperature controller, etc.

Plant & Machinery Needed To Make Insulation Tapes in India

  1. A slicing machine complete with 2 H.P. Motor, Starter & Circular Knives.
  2. Attritor cum Emulsifier 200 Liter capacity with 5 H.P. A.C. Motor.
  3. 12″ X 26″ Three Roll Mass Grinding machine with 15 H.P. Motor, Gear Box & Starter.
  4. Testing and lab equipment.

The primary raw material required is PVC film-100. Also, you have to procure rubber-based adhesive, core for winding, and packaging consumables. 

PVC Insulation Tape Production Process

However, the current project predicts the production of PVC Self-adhesive Electric Insulation Tapes from PVC film rolls obtained from the market. Although the manufacturing process essentially consists of the following primary operations.

  • Adhesive mass manufacturing.
  • The approach of primer and adhesive coating to the PVC film.
  • Drying of the adhesive coating at the necessary temperature.
  • Cutting the film rolls into tapes of necessary width.
  • The required length of the finished tapes cut on cores and suitably packed for dispatch.

What is the Quality Standard of PVC Insulation Tape?

Quality parameters required for PVC Insulation tape generally depend on the following features:

  • Stickiness of tape.
  • Good ‘stitching’ ability.
  • The adhesive should not spread when the heat is applied.
  • Long-lasting adhesion.
  • Water, weather, and temperature resistance.
  • Also resistant to acids, alkalis, oils, greases, etc.
  • BIS quality specification and standard for PVC insulation tape I.S.: 7809 – 1986 should follow.

Advantages of PVC Tapes

  • Higher production speed of 30-35 meters /min compared to the conventional process and produces three times the quantity.
  • Compact coating machine design- occupy 1/3 space than conventional.
  • Very cost-effective as no prior knowledge is required, and the adhesive is natural rubber latex-based.
  • Low maintenance costs due to simple and innovative designs.
  • Lower adhesive manufacturing cost, process cost, and capital investment.
  • No heat treatment on the log.
  • No loss in physical properties of PVC film. Therefore, no shrinkage and stretching in the film found.
  • 100% Eco-friendly product as no solvent is the mix; thus, no solvent vapours find after drying. No health and fire hazards.
  • Slicing can be done immediately after winding.

Therefore a lot of saving during the production process and timings.

PVC Tape Market Growth

The market growth of PVC Tape is estimated to increase with increase in the investment in commercial or residential projects across the country. Market demand of PVC Tapes is estimated to rise because of increase in disposable incomes and favorable policies of the government. Because of ease of application and versatility, it is used in many industries be it labelling or packaging, electrical or electronics, transportation or automotive, building or engineering etc. The demand for PVC Tapes will increase by growing focus on energy saving through efficient  pipe systems and growing awareness of using sustainable methods in the upcoming years. 

How much space is needed to start PVC Tape Manufacturing Business in India?

If you want to start PVC Tape manufacturing business in India out at a good location, then space of 500 square feet is enough initially. You can also start this business from home. initially you should start this business on a low investment plan.

How to Download PVC Pipe Project Report?

Gone are the days when one had to wait at the door of the expert writing project reports and taking too long. You can now get your Cello PVC insulation Manufacturing sample report in hand, by instantly downloading it in excel or word format.

First Step            –   Click add to basket  >>  Check Out  >>  Payment

Second Step       –  Immediately after successful payment, you will get a link to download the report. You can download the report immediately from this link.

Sample Project Report Format of PVC Tape Business

In our project report format, we have covered all the technical details, its diagrams, flow chart etc. as and when required or deemed fit to include. You can also prepare in-depth financial calculations which is necessary for the Investor/bank.

Contents of PVC Tape Business Plan
Sr. No.Particulars
3Market Potential
4Industrial Scenario
5Product Description
6Product Uses
7Raw Material Requirement
8Manufacturing Process
9Indian Standard
10Project Components
11Land /Civil Work
12Plant & Machinery with Images
13License & Approvals
14Swot Analysis
15Cost of Project
16Projected Balance Sheet
17Cash Flow Statement
18Profitability Statement
19Calculation of D.S.C.R
20Computation of Production
21Computation of Working Capital Requirement
23Repayment Schedule of Term Loan
24Break Even Point Analysis
25Financial Indicators
26Implementation Schedule
For whom is Insulation Tape Project Report Useful?
  1. CA Chartered Accountants
  2. Tax Consultants
  3. Small Business Owners
  4. Students
  5. Engineers

In addition to those who want to prepare project reports themselves.

Frequently Asked Questions on PVC Tape Project Report For Bank Loan PDF

How to start PVC Tape Manufacturing Business in India?

You can easily start PVC Tape Manufacturing business in India by exploring the market to know the best location in your area. You will also have to study the PVC Tape Processing project report to get every important detail about this business.

What are the requirements to start PVC Tape Manufacturing business in India?

You require a well written PVC Tape project report for this business. This you can get from our website in a gist of time. It contains every significant detail about this startup that can benefit you in making wise decisions. You will also have to arrange space and buy equipments that we have listed in the project report.

Where can i get PVC Tape sample project report for bank loan pdf?

Well, you can explore the best PVC Tape project report PDF on our website and take help by checking out all the important details for your new business from it. It will serve you as a guide using which you can write your own PVC Tape Manufacturing unit project report and submit it to the bank to avail loan for your new venture.

What is the right PVC Tape business project report format for bank loan?

We have clearly stated the right format for this start up in our project report. You can check out the PVC Tape Manufacturing unit project report details by downloading it after making a nominal payment to us. We have covered every important aspect of this venture in our report.

Can I download PVC Tape project report in the format of excel or word file?

You can easily download this project report from our website in PDF Format and use it for writing your project report. If you want to get it in word or excel file. It is very simple to later convert the pdf to word or excel using free file converting tools.

Can I download PVC Tape project report and use it for bank loan under pmegp mudra and other government scheme?

The main objective of this project report is to highlight all important aspects of this business for your new set up and to provide sample format for preparing project reports for other purposes. However, according to your need, we will prepare customized project report for your set up so that you can get loan from the bank under any scheme.


You may also like…